Mitsibushi zero

Replied by Ex-Member on topic Mitsibushi zero

Still painting.

both models are around the 500gm mark without 3s lipo fitted.
both are 11th scale as well.

need to do something german and american to finish the set off.

Please Log in or Create an account to join the conversation.

Replied by Ex-Member on topic Mitsibushi zero

got very little done today

a little bit of painting, that's all

Please Log in or Create an account to join the conversation.

Replied by Ex-Member on topic Mitsibushi zero

panel lines on the wing and the ailerons made.

rudder and elevator servo's fitted and working.

need to mount the esc next and then i can glue the wing on and make the fairing.

Please Log in or Create an account to join the conversation.

Replied by Ex-Member on topic Mitsibushi zero

rudder works
elevator works
ailerons work
motor works
wing is being glued on.

and here we have the first two of a range of models.

Please Log in or Create an account to join the conversation.

Replied by Ex-Member on topic Mitsibushi zero

covering the ailerons today, should be ready for paint and fitting tomorrow.

started making the plug for the canopy.
bit bigger than the Spit one, so doing it slightly differently.
hope it works ok.

Please Log in or Create an account to join the conversation.

Replied by Ex-Member on topic Mitsibushi zero

well i think the canopy plug is ready now.
will find out tomorrow when i make the first one.

Please Log in or Create an account to join the conversation.

Replied by Ex-Member on topic Mitsibushi zero

made the battery hatch today.
needs covering, painting and the catches making next.

Please Log in or Create an account to join the conversation.

Replied by Ex-Member on topic Mitsibushi zero

this is the second attempt at the zero canopy.
cant quite get it right.

might look ok from a distance though.

Please Log in or Create an account to join the conversation.

Replied by Ex-Member on topic Mitsibushi zero

this looks a bit better now.

nearly finished at last

Please Log in or Create an account to join the conversation.

Replied by Ex-Member on topic Mitsibushi zero

Battery hatch done.
pilot made.
just need an rx binding and i can fit the canopy.
be another one finished.

Please Log in or Create an account to join the conversation.