Aeromodellers Forum
Here's one for the serious builders. Show us your ideas

Small TSR2 for twin edf's

  • Ex-Member
  • Topic Author
  • User
  • User
More
13 Jul 2017 18:25 - 13 Jul 2017 18:33 #1 by Ex-Member
Small TSR2 for twin edf's was created by Ex-Member
Decided as i have finished two old projects this month i would treat myself to a new one today.

Dug out my old design from 2016 and printed out the fuselage plan and formers.

so later this evening i will be cutting out formers for it.

Tony B
Last edit: 13 Jul 2017 18:33 by Ex-Member.

Please Log in or Create an account to join the conversation.

More
13 Jul 2017 19:18 #2 by Squirrelnet
Replied by Squirrelnet on topic Small TSR2 for twin edf's
I knew that work table wouldn't stand empty for long [badass]

Please Log in or Create an account to join the conversation.

  • Ex-Member
  • Topic Author
  • User
  • User
More
14 Jul 2017 19:17 #3 by Ex-Member
Replied by Ex-Member on topic Small TSR2 for twin edf's
some bits cut out from Depron.
[img


and a few hours later.
[img


i need to look at fitting the edf's and planking the jet tubes next.

Tony B

Please Log in or Create an account to join the conversation.

More
14 Jul 2017 21:42 #4 by Quorneng
Replied by Quorneng on topic Small TSR2 for twin edf's
Tony
Very impressive and quick building!
I don't envy you constructing the ducts.
I hope it all proves light enough.
Thanks: Ex-Member

Please Log in or Create an account to join the conversation.

  • Ex-Member
  • Topic Author
  • User
  • User
More
20 Jul 2017 19:04 #5 by Ex-Member
Replied by Ex-Member on topic Small TSR2 for twin edf's
Well i have been plodding on with planking the jet tubes and sheeting parts of the fuselage.

we will get there slowly.

[img


Tony B

Please Log in or Create an account to join the conversation.

More
21 Jul 2017 03:42 #6 by Mike Rolls
Replied by Mike Rolls on topic Small TSR2 for twin edf's
Looking good!!
Mike
The older I get, the better I was!

Please Log in or Create an account to join the conversation.

  • Ex-Member
  • Topic Author
  • User
  • User
More
26 Jul 2017 17:17 #7 by Ex-Member
Replied by Ex-Member on topic Small TSR2 for twin edf's
[img


tubes planked.
fuselage halves joined.
started cutting out the fin and tail planes

we plod on.

Tony B

Please Log in or Create an account to join the conversation.

  • Ex-Member
  • Topic Author
  • User
  • User
More
25 Aug 2017 16:51 #8 by Ex-Member
Replied by Ex-Member on topic Small TSR2 for twin edf's
Finally back on this project.
the twin edf's are now fitted and working, loads of thrust even on a 3s lipo.

made a start on the wings today.
[img


won't be doing any more now till after the Nats.

Tony B

Please Log in or Create an account to join the conversation.

More
25 Aug 2017 17:19 #9 by Eric
Replied by Eric on topic Small TSR2 for twin edf's
Have fun swatting gnats at the Nats. :evil:
if you are calm and collected when all about you are going berserk - you've missed something important!

Please Log in or Create an account to join the conversation.

Time to create page: 1.594 seconds