- Posts: 3
- Thank you received: 7
FPV FlyingWing
06 Apr 2016 14:30 - 06 Apr 2016 16:54 #1
by SavageHAWK
Hear is the FPV Flying wing I built using Jim Collins design .... it was very easy to build and very cheep. I used two A1 sheets of 5mm foam board. (this may not be the best product to use) that being said it has worked for me.
any advice on improvements power sources etc would be awesome.
As stated this is not my drawing and huge thanks to jim Collins for giving me the plans. you can find his video on youtube hear is the link ......
this is my first ever post so if it is wrong please don't hate me just correct me
thanks
AndrewSavage
FPV FlyingWing was created by SavageHAWK
This attachment is hidden for guests.
Please log in or register to see it.
Please log in or register to see it.
Hear is the FPV Flying wing I built using Jim Collins design .... it was very easy to build and very cheep. I used two A1 sheets of 5mm foam board. (this may not be the best product to use) that being said it has worked for me.
any advice on improvements power sources etc would be awesome.
As stated this is not my drawing and huge thanks to jim Collins for giving me the plans. you can find his video on youtube hear is the link ......
this is my first ever post so if it is wrong please don't hate me just correct me
thanks
AndrewSavage
Please Log in or Create an account to join the conversation.
06 Apr 2016 15:29 #2
by
Replied by on topic FPV Flaying
Hi Andrew and welcome to the forum.
No one is "hated" on here only me as I do the modding
Seriously when you have a couple of mins spare , stick a post on "Introduce Yourself " thread , then the members have some idea of your experience etc, and saves the granny sucking eggs scenario.
Once again welcome aboard and hope your stay in profitable
Garry
No one is "hated" on here only me as I do the modding
Seriously when you have a couple of mins spare , stick a post on "Introduce Yourself " thread , then the members have some idea of your experience etc, and saves the granny sucking eggs scenario.Once again welcome aboard and hope your stay in profitable
Garry
Please Log in or Create an account to join the conversation.
06 Apr 2016 16:43 #3
by Ex-Member
Replied by Ex-Member on topic FPV FlyingWing
nice wing sir,
welcome to the nut house.
welcome to the nut house.
Please Log in or Create an account to join the conversation.
06 Apr 2016 18:43 #5
by one tenor
Anything will fly given enough power
Replied by one tenor on topic FPV FlyingWing
Welcome from me too. Watching the build reminds me .Anyone know how I can get my metre steel rule trued up. Mine got waves in it for want of a better description. I got most of it but it is hard to hold flat . Any advice appreciated ![[badass]](/media/kunena/emoticons/bad_boys_20.gif "[badass]")
Anything will fly given enough power
Please Log in or Create an account to join the conversation.
07 Apr 2016 17:17 #9
by Eric
if you are calm and collected when all about you are going berserk - you've missed something important!
Replied by Eric on topic FPV FlyingWing
And as all of us modellers who have been building for a million years - know, if you use a self-healing cutting mat (to cut on, not to keep your coffee on!) the knife blade tip doesn't blunt so fast, and the grain of the workbench top doesn't 'pull' the blade off-line, don't we!
if you are calm and collected when all about you are going berserk - you've missed something important!
Please Log in or Create an account to join the conversation.
Time to create page: 0.177 seconds