Aeromodellers Forum
  1. Forum
  3. Forum Categories
  5. Scale Models.
  7. Small TSR2 for twin edf's
× Here's one for the serious builders. Show us your ideas

Small TSR2 for twin edf's

  • Ex-Member
  • Topic Author
  • Visitor
  • Visitor
13 Jul 2017 18:25 - 13 Jul 2017 18:33 #1 by Ex-Member
Small TSR2 for twin edf's was created by Ex-Member
Decided as i have finished two old projects this month i would treat myself to a new one today.

Dug out my old design from 2016 and printed out the fuselage plan and formers.

so later this evening i will be cutting out formers for it.

Tony B
Last edit: 13 Jul 2017 18:33 by Ex-Member.

Please Log in or Create an account to join the conversation.

More
13 Jul 2017 19:18 #2 by Squirrelnet
Replied by Squirrelnet on topic Small TSR2 for twin edf's
I knew that work table wouldn't stand empty for long [badass]

Please Log in or Create an account to join the conversation.

  • Ex-Member
  • Topic Author
  • Visitor
  • Visitor
14 Jul 2017 19:17 #3 by Ex-Member
Replied by Ex-Member on topic Small TSR2 for twin edf's
some bits cut out from Depron.
File Attachment:


and a few hours later.
File Attachment:


i need to look at fitting the edf's and planking the jet tubes next.

Tony B

Please Log in or Create an account to join the conversation.

More
14 Jul 2017 21:42 #4 by Quorneng
Replied by Quorneng on topic Small TSR2 for twin edf's
Tony
Very impressive and quick building!
I don't envy you constructing the ducts.
I hope it all proves light enough.
Thanks: Ex-Member

Please Log in or Create an account to join the conversation.

  • Ex-Member
  • Topic Author
  • Visitor
  • Visitor
20 Jul 2017 19:04 #5 by Ex-Member
Replied by Ex-Member on topic Small TSR2 for twin edf's
Well i have been plodding on with planking the jet tubes and sheeting parts of the fuselage.

we will get there slowly.

File Attachment:


Tony B

Please Log in or Create an account to join the conversation.

More
21 Jul 2017 03:42 #6 by Mike Rolls
Replied by Mike Rolls on topic Small TSR2 for twin edf's
Looking good!!
Mike
The older I get, the better I was!

Please Log in or Create an account to join the conversation.

  • Ex-Member
  • Topic Author
  • Visitor
  • Visitor
26 Jul 2017 17:17 #7 by Ex-Member
Replied by Ex-Member on topic Small TSR2 for twin edf's
File Attachment:


tubes planked.
fuselage halves joined.
started cutting out the fin and tail planes

we plod on.

Tony B

Please Log in or Create an account to join the conversation.

  • Ex-Member
  • Topic Author
  • Visitor
  • Visitor
25 Aug 2017 16:51 #8 by Ex-Member
Replied by Ex-Member on topic Small TSR2 for twin edf's
Finally back on this project.
the twin edf's are now fitted and working, loads of thrust even on a 3s lipo.

made a start on the wings today.
File Attachment:


won't be doing any more now till after the Nats.

Tony B

Please Log in or Create an account to join the conversation.

More
25 Aug 2017 17:19 #9 by Eric
Replied by Eric on topic Small TSR2 for twin edf's
Have fun swatting gnats at the Nats. :evil:
if you are calm and collected when all about you are going berserk - you've missed something important!

Please Log in or Create an account to join the conversation.

  1. Forum
  3. Forum Categories
  5. Scale Models.
  7. Small TSR2 for twin edf's
Time to create page: 0.165 seconds