Introduction to Cura
14 Aug 2025 17:43 #1
by Klipkopwildlife
Do it now, you may never get another chance
Introduction to Cura was created by Klipkopwildlife
One of our members seems to be having a problem with Cura so I thought I'd do a little walk around. When you've been using a piece of software for a very long time, and through various iterations, things that seem obvious aren't to a newcomer.
After loading Cura choose your machine
Once you have a machine that even roughly resembles yours, choose a basic profile
here and then I find a good all round is Draft 0.2mm
from there you should choose to see all settings
Lastly you can save and load from Manage Profiles
After loading Cura choose your machine
Once you have a machine that even roughly resembles yours, choose a basic profile
here and then I find a good all round is Draft 0.2mm
from there you should choose to see all settings
Lastly you can save and load from Manage Profiles
Do it now, you may never get another chance
Attachments:
Please Log in or Create an account to join the conversation.
14 Aug 2025 17:49 #2
by Klipkopwildlife
Do it now, you may never get another chance
Replied by Klipkopwildlife on topic Introduction to Cura
Once you have done these preparations you should now be able to see and modify your settings
Do it now, you may never get another chance
Attachments:
Please Log in or Create an account to join the conversation.
Time to create page: 0.119 seconds