Here's one for the serious builders. Show us your ideas

FMS P51 Mustang

The Beard
Topic Author
Offline
Forum Master

09 Mar 2016 09:16 #1 by The Beard

FMS P51 Mustang was created by The Beard

Mine arrived yesterday and incredible value for money from Kings Lynn Models .Ive bought the Siver Red Tail model already has decals and not a lot to do .Instructions as with any chinese model are vague but did come with receiver and controller which I wont use.One question ive never thought about.It has a warning not to use higher than 6 volts to servos etc but recommends 14.8 bvolt battery.I assume the speed controller sorts that out but ive never thought about it before.

Please Log in or Create an account to join the conversation.

Eric
Offline
Moderator

09 Mar 2016 09:47 #2 by Eric

Replied by Eric on topic FMS P51 Mustang

That's what the BEC (Battery Elimination Circuit) does, Beardy.
It splits the volts from the lipo, so the speed controller gets the full load, and the receiver gets about 5v which also works the servos. [badass]

if you are calm and collected when all about you are going berserk - you've missed something important!

Please Log in or Create an account to join the conversation.

The Beard
Topic Author
Offline
Forum Master

09 Mar 2016 12:00 #3 by The Beard

Replied by The Beard on topic FMS P51 Mustang

thanks very much Eric

Please Log in or Create an account to join the conversation.

The Beard
Topic Author
Offline
Forum Master

09 Mar 2016 15:32 #4 by The Beard

Replied by The Beard on topic FMS P51 Mustang

after a short time flying I was able to give the P51 some attention.Very thoughtful packaging,example the screws are labelled and the horns ands screws are cellotaped to where the should go be it elevator or rudder.
First job is the propellor .the blades screwing onto the back of the spinner each one held by 2 screws.a big 4 blade prop

Please Log in or Create an account to join the conversation.

The Beard
Topic Author
Offline
Forum Master

09 Mar 2016 15:34 #5 by The Beard

Replied by The Beard on topic FMS P51 Mustang

Next was fitting the horizontal stabiliser and rudder all easy stuff,and followed by the horns

Please Log in or Create an account to join the conversation.

The Beard
Topic Author
Offline
Forum Master

09 Mar 2016 15:34 #6 by The Beard

Replied by The Beard on topic FMS P51 Mustang

ive taken photos but nothing is connecting to my computer

Please Log in or Create an account to join the conversation.

The Beard
Topic Author
Offline
Forum Master

09 Mar 2016 19:50 #7 by The Beard

Replied by The Beard on topic FMS P51 Mustang

ive selected a receiver no spare room on my computer

Please Log in or Create an account to join the conversation.

The Beard
Topic Author
Offline
Forum Master

11 Mar 2016 10:35 #8 by The Beard

Replied by The Beard on topic FMS P51 Mustang

I meant controller ,The only problem that's come up is the plug for the Battery as no one seems to have them

Please Log in or Create an account to join the conversation.

Eric
Offline
Moderator

11 Mar 2016 11:17 #9 by Eric

Replied by Eric on topic FMS P51 Mustang

What kind of plug - someone may have one in their junk box. :unsure:

if you are calm and collected when all about you are going berserk - you've missed something important!

Please Log in or Create an account to join the conversation.

The Beard
Topic Author
Offline
Forum Master

11 Mar 2016 13:44 #10 by The Beard

Replied by The Beard on topic FMS P51 Mustang

I would photo it but my phones refuse to connect to my computer.Ill just solder a deans on to it

Please Log in or Create an account to join the conversation.

The Beard
Topic Author
Offline
Forum Master

12 Mar 2016 14:06 #11 by The Beard

Replied by The Beard on topic FMS P51 Mustang

I hope to be soldering tonite had to feel around shed in the dark as I cannot find a torch for a ceramis tile to use as it looks a challenge to remove the speed controller and the lead is quite long so should be ok

Please Log in or Create an account to join the conversation.

The Beard
Topic Author
Offline
Forum Master

13 Mar 2016 06:46 #12 by The Beard

Replied by The Beard on topic FMS P51 Mustang

the soldering went brilliantly and was very successful.I then popped a battery in and everything works perfectly except for my controller .The right control has fallen in and I can see screws have fallen out but cannot locate them so careful searching tonite inside.Even the tail wheel is retract

Please Log in or Create an account to join the conversation.

The Beard
Topic Author
Offline
Forum Master

13 Mar 2016 10:05 #13 by The Beard

Replied by The Beard on topic FMS P51 Mustang

ive brought both my phones to work and both have downloaded onto my lap to my lap top so lets see what I have

Attachments:

Please Log in or Create an account to join the conversation.

The Beard
Topic Author
Offline
Forum Master

13 Mar 2016 10:06 #14 by The Beard

Replied by The Beard on topic FMS P51 Mustang

nice

Attachments:

Thanks: Klipkopwildlife, Septic

Please Log in or Create an account to join the conversation.

The Beard
Topic Author
Offline
Forum Master

13 Mar 2016 10:07 #15 by The Beard

Replied by The Beard on topic FMS P51 Mustang

Myself and my grandson

Please Log in or Create an account to join the conversation.

Time to create page: 0.950 seconds

Login Form

FMS P51 Mustang