KAMCO KADET

Good use of they day glow yellow i sent you then ?

yes ta.

what would be nice, would be a big "KAMCO KADET" sticker to put on the wing.

Looks really good Tony congratulations

At the speed you built that model Tony you should give it one of those flame paint jobs on the nose!

ill sort that!

Grumpy42 wrote: At the speed you built that model Tony you should give it one of those flame paint jobs on the nose!

We are hopefully meeting Tony at the Nats in August Grumps. I think we should do the flame paint job on HIS nose !!! He is faster than Concorde was.

Garry

looks fantasic. When is the maiden?

Tony B. AKA Blooper wrote: yes ta.

what would be nice, would be a big "KAMCO KADET" sticker to put on the wing.

Don't forget the modelchat logo on the other wing

Lovely work Tony, looks brilliant.
I'm interested in how it performs with a leccy motor

How does it balance out Tony, that little motor can't be very heavy.. what is it by the way?
do you think we're going to have to lighten the tail end on a dedicated leccy version?

the motor is a bit big, its from the 6lb defunct telemaster. emax 2820 and a 2200mah 3s battery.
balance is just about spot on so a lighter tail will not be needed.

Tony B. AKA Blooper wrote: the motor is a bit big, its from the 6lb defunct telemaster. emax 2820 and a 2200mah 3s battery.
balance is just about spot on so a lighter tail will not be needed.

blimey! shows how much I know about electric flght! it looks tiny! :lol:

I suppose the batteries are heavier than a tank of fuel so it evens thing out.

it might not fly.

just a thought, the main u/c, would not a pre formed ali set be easier to manufacture than the bent wire set up of the original.
can buy them off the shelf, might make it easier for the first time builder to do.

certainly something to consider, or offer people the option.
same as wheels, slightly bigger for grass patches maybe.

kamco kid wrote: How does it balance out Tony, that little motor can't be very heavy.. what is it by the way?
do you think we're going to have to lighten the tail end on a dedicated leccy version?

Maybe one thing has been missed here KK. With an I/C model, the tank is normally fixed. Not so with electric, as usually the lipo can be moved quite a large amount fore or aft.

Garry

well at 1/3rd chord with a 2200mah lipo in, the balance is spot on.
might change once i get all the servo's and rods in.