- Posts: 6781
- Thank you received: 10722
- Forum
- Forum Categories
- Construction Techniques & Aeromodelling Materials.
- Smokeless Smoke Generator .
Smokeless Smoke Generator .
- THE BLACKBIRD
-
- Offline
- Forum Master
-
Less
More
21 Jun 2019 18:19 #31
by THE BLACKBIRD
Replied by THE BLACKBIRD on topic Smokeless Smoke Generator .
Please Log in or Create an account to join the conversation.
- Klipkopwildlife
-
- Offline
- Administrator
-
- I'm supposed to be retired!
21 Jun 2019 18:35 #32
by Klipkopwildlife
Do it now, you may never get another chance
Replied by Klipkopwildlife on topic Smokeless Smoke Generator .
Surely you can just unplug the servo making sure your rudder is straight. Then plug your 'smoke' servo in the rudder socket.
Do it now, you may never get another chance
Thanks: crash happy
Please Log in or Create an account to join the conversation.
- supertigrefan
-
- Offline
- Elite Member
-
Less
More
- Posts: 470
- Thank you received: 513
22 Jun 2019 12:26 - 22 Jun 2019 12:26 #33
by supertigrefan
Stay low, Move fast, Trust no-one....
Replied by supertigrefan on topic Smokeless Smoke Generator .
You may be more successful trying to create a vacuum using a venturi to draw the powder out rather than trying to create positive pressure to push it out, that tube would still be necessary to keep a flow through the storage tank.
Stay low, Move fast, Trust no-one....
Last edit: 22 Jun 2019 12:26 by supertigrefan.
Thanks: crash happy
Please Log in or Create an account to join the conversation.
- crash happy
-
Topic Author
- Offline
- Platinum Member
-
- Oops. did I say that out loud!
Less
More
- Posts: 1250
- Thank you received: 1203
22 Jun 2019 17:57 #34
by crash happy
Replied by crash happy on topic Smokeless Smoke Generator .
I think I've solved It ST. see a previous comment on twin tubes.
Please Log in or Create an account to join the conversation.
- Forum
- Forum Categories
- Construction Techniques & Aeromodelling Materials.
- Smokeless Smoke Generator .
Time to create page: 0.440 seconds