Surrey flying services AL 1

Replied by Ex-Member on topic Surrey flying services AL 1

frame needs a slight tidy up and then glazing.

we plodlodle on

Tony B

Please Log in or Create an account to join the conversation.

Please Log in or Create an account to join the conversation.

Replied by Firewood on topic Surrey flying services AL 1

You will succeed

---

I'm so clever that sometimes I don't understand a single word of what I'm saying.

Please Log in or Create an account to join the conversation.

Replied by Ex-Member on topic Surrey flying services AL 1

working on it a little bit each day.

Tony B

Please Log in or Create an account to join the conversation.

Replied by Ex-Member on topic Surrey flying services AL 1

Decided to work on the cockpit area today.
rudder and elevator servos are under the floor and working.
now working on the padding round the opening.

I am using 3mm Depron as it curves well, i will be sanding it to shape once it has stuck.

got to work out the twin control sticks next and the seat backs.

Tony B

Please Log in or Create an account to join the conversation.

Replied by Ex-Member on topic Surrey flying services AL 1

cockpit coming done.

started the rigging today as well.

Tony (bit uneasy) B

Please Log in or Create an account to join the conversation.

Replied by Ex-Member on topic Surrey flying services AL 1

well as it was persisting it down i started making up some rigging wires.
60lb fishing trace and crimps, heat shrink and lots of swearing.

these went fairly well, so i did some more.

had the rest of the day on a taxi run.
so i will make the last 3 tomorrow after i have been flying.

Tony (wired) B

Please Log in or Create an account to join the conversation.

Please Log in or Create an account to join the conversation.

Please Log in or Create an account to join the conversation.

Please Log in or Create an account to join the conversation.

Please Log in or Create an account to join the conversation.

Replied by Ex-Member on topic Surrey flying services AL 1

Cabane rigging done.

screen gluing in place.

going to be fun fitting the battery though.


Tony B

Please Log in or Create an account to join the conversation.

Please Log in or Create an account to join the conversation.

Replied by Ex-Member on topic Surrey flying services AL 1

Tailplane and elevator covered and sealed and my feeble attempts at rib stitching.

i can glue the tailplane onto the fuselage next.

we plod on slowly.

Tony B

Please Log in or Create an account to join the conversation.

Please Log in or Create an account to join the conversation.