3D printing Widgets
- Klipkopwildlife
-
Topic Author
- Offline
- Administrator
-
- I'm supposed to be retired!
04 Oct 2026 17:46 - 04 Oct 2026 17:48 #406
by Klipkopwildlife
Do it now, you may never get another chance
Replied by Klipkopwildlife on topic 3D printing Widgets
Well I've just spent 3 weeks trying to get to grips with FCad, grr.
I find it very counter intuitive, what really threw me was I would save the drawing (Sketch in FCad) but when I loaded it back I couldn't edit it!
It seems it's one of those things that 'everybody knows' so is never written down. I finally found a tiny button that you have to right click!
A new model is about to break cover but to get a reasonable CoG I had to make some battery holders to stop them floating around in the fuselage.
Several iterations required to get them exactly the right size.
I find it very counter intuitive, what really threw me was I would save the drawing (Sketch in FCad) but when I loaded it back I couldn't edit it!
It seems it's one of those things that 'everybody knows' so is never written down. I finally found a tiny button that you have to right click!
A new model is about to break cover but to get a reasonable CoG I had to make some battery holders to stop them floating around in the fuselage.
Several iterations required to get them exactly the right size.
Do it now, you may never get another chance
Last edit: 04 Oct 2026 17:48 by Klipkopwildlife.
Please Log in or Create an account to join the conversation.
- Eric
-
- Offline
- Moderator
-
- Eric
-
- Offline
- Moderator
-
Time to create page: 0.787 seconds