• Page:
  • 1
  • 2

Topics in Category: Fixed wing IC models.

emo
Views: 54
Replies: 3
Preview
miniconverter's Avatar
Topic started 09 Apr 2018 17:46 by miniconverter
Can anyone confirm if the Zenoah G62PU 62cc comes with an electric start or not, part of the description says "Start system: Electric motor device". Rang Just Engines and the person I spoke to didn't know, why he didn't go and look is a mystery as he said they where in stock. This is only for the...
one tenor's Avatar
Last Post by one tenor 10 Apr 2018 01:45
Quote: Can anyone confirm if the Zenoah G62PU 62cc comes with an electric start or not, part of the description says "Start system: Electric motor device". Rang Just Engines and the person I spoke to didn't know, why he didn't go and look is a mystery as he said they where in stock. This is only for the...
emo
Views: 439
Replies: 13
Preview
The Beard's Avatar
Topic started 13 Dec 2017 12:38 by The Beard
Purchased through E bay for £46 I collected this model from Aylesbury last Thursday.Its in very good condition and only needs a receiver to make ready for flight.It appears to be fitted with an Irvine IC engine with in cowl silencer.Hopefully I can set it up and fly in as soon as the weather allows...
The Beard's Avatar
Last Post by The Beard 12 Jan 2018 16:24
with whats been happening havent got round to doing any photos yet
emo
Views: 751
Replies: 30
Preview
The Beard's Avatar
Topic started 03 Aug 2017 13:26 by The Beard
i bought this model off E bay a few years ago and when i arrived to collect iy it still had a Laser 4 stroke in it I think its a 50 but unable to see a marking.I have enjoyed flying this model very much but always had to spend time getting the engine running.Once running its perfect.Last time I took...
The Beard's Avatar
Last Post by The Beard 08 Sep 2017 13:35
what twin whose attic I havent either ??.Im not sure I mentioned but last time I flew the T180 it went right until it cartwheeled but the damage is light and an easy repair.wing mount,horizontal stabilizer re glue rudder re glue,engine mount.On checking it over the right aileron servo had failed...
emo
hanger 9 Pulse XT 40
Views: 2050
Replies: 85
Preview
The Beard's Avatar
Topic started 07 Feb 2017 15:30 by The Beard
i picked this upto day as new fitted with ASP 61 4 stroke and only needing areceiver flown just once [attachment]
The Beard's Avatar
Last Post by The Beard 06 Aug 2017 12:45
yes a fair amount of rain lately
emo
Hangar 9 Carbon Cub
Views: 3981
Replies: 129
Preview
The Beard's Avatar
Topic started 29 Oct 2016 00:03 by The Beard
I'm considering a bit of a diversion for me .The recommended engine is 15cc Petrol any suggestions please
The Beard's Avatar
Last Post by The Beard 02 Aug 2017 09:10
Yes Ive watched some videos Eric
emo
Harmon Rocket
Views: 2134
Replies: 70
Preview
The Beard's Avatar
Topic started 16 May 2016 17:59 by The Beard
always been my favorite and so when I saw one on E bay I bid and bought so early Wednesday morning Im off to Bristol to collect my latest Rocket only £56 complete
The Beard's Avatar
Last Post by The Beard 25 Jun 2017 12:24
the more I fly this model the better it gets
emo
Views: 713
Replies: 25
Preview
The Beard's Avatar
Topic started 07 Feb 2017 16:30 by The Beard
bought this today at the field brand new unflown fitted with a new 40 2 stroke which hasnr been started .Only needs the receiver and only £80
The Beard's Avatar
Last Post by The Beard 09 May 2017 16:56
[attachment]
emo
artf Acro wot
Views: 2779
Replies: 75
Preview
The Beard's Avatar
Topic started 21 Oct 2015 17:06 by The Beard
I bought one of these from a club member when he gave up .When I had my knees replaced it was stolen out of my truck .Always wanted to replace it so now I havw.Ive lost my camera charger so will do what I can.Its having an SC 52 2 stroke from my lost challenger
The Beard's Avatar
Last Post by The Beard 08 Sep 2016 23:34
I recently changed the engine as I was having problems with deadsticks and the replacement is a cracker I had to repair the vertical stabiliser and it went again yesterday so reglued again Very windy today but steady and straight down the strip and the Acrowot excelled giving me a good days flying
emo
Extra slim twin
Views: 7936
Replies: 78
Preview
Tony B's Avatar
Topic started 03 Jun 2012 16:29 by Tony B
Well phil has dropped me off a new project. a fun fly extra slim twin. twin boom with center flap and powered by (wait for it grumps) 2x25 to 40 two strokes.
Klipkopwildlife's Avatar
Last Post by Klipkopwildlife 23 Jun 2016 18:45
Good to see you're still around Phil, does anyone know where I can get a plan for one of these?
emo
Views: 1247
Replies: 37
Preview
The Beard's Avatar
Topic started 27 Dec 2015 12:20 by The Beard
quite why the model is called Sea Eagle defeats me as I don't think it suits ,more of a warbird name to me.This was my 2015 Christmas build alongside rebuilding my Acrowot fuselage but Wednesday night my modem packed up and as its solely available from Virgin I'm of course still waiting.For the...
The Beard's Avatar
Last Post by The Beard 11 Jun 2016 12:42
flew again on Wednesday with 50% ailerons and it was loads better and landings were excellant
emo
Views: 277
Replies: 0
Preview
DominicM's Avatar
Topic started 05 Apr 2016 11:26 by DominicM
As part of the RareBear Racing event I attended last weekend the Horizon Team put on a fantastic demo of their latest products and models. Azza and Sonny practicing for the show season with their Hanger 9 P3 Revolutions. [video]
emo
Views: 411
Replies: 2
Preview
Tony B's Avatar
Topic started 04 Mar 2016 22:44 by Tony B
[attachment] [attachment] just playing with ideas, like you do :P
Quorneng's Avatar
Last Post by Quorneng 08 Mar 2016 20:08
With its plank wings the nearest would be the AW Whitley? [image]
emo
Views: 823
Replies: 16
Preview
The Beard's Avatar
Topic started 07 Aug 2015 22:35 by The Beard
I built one of these at Christmas only flew it last week it crashed seriously on its Maiden .Either a duff battery or switch not sure but just dropped vertically no re[sponse to controls and no life when we reached it Im building a new one
The Beard's Avatar
Last Post by The Beard 29 Oct 2015 16:51
sadly I had a on board battery malfunction in the air and it was destroyed ,imreplacing it with an Acrowot which Im putting together at present
emo
Views: 411
Replies: 2
Preview
DominicM's Avatar
Topic started 02 Jun 2015 07:28 by DominicM
Just awesome MONSTER scale RC flying ! [video]
Garry Pollard's Avatar
Last Post by Garry Pollard 02 Jun 2015 09:21
Super vid Dom, and thanks for posting. I also think it is very skill full, and take my hat off to the pilot who has the nerve to do what he does with something so huge . Garry
emo
Views: 397
Replies: 2
Preview
Si_B's Avatar
Topic started 11 Mar 2015 22:15 by Si_B
Never owned a petrol plank......so thought I'd jump in with something big. [image] Got a 111 DLE twin up front. Got some tidying to do but it's all cosmetic. Need to think of a nice scheme at some point....[image] Going to have a...
Si_B's Avatar
Last Post by Si_B 12 Mar 2015 00:09
Sold one of my turbines which I had for my Vampire. Had the plans for a year and not even started yet so will worry about getting another turbine once building commences. Few other things have gone as well. Simon
emo
Views: 475
Replies: 1
Preview
Fly-Navy's Avatar
Topic started 21 Dec 2014 20:59 by Fly-Navy
Need some help in the identification of one the models bequeathed by my mate to me. It is a 1/4 scale??? ( 2430 mm wing span) model all yellow with the registration NC76510, it appears to be very much like the Hangar 9 one with the exact same perspex panel above cockpit but the strut fixing is a...
Fly-Navy's Avatar
Last Post by Fly-Navy 21 Dec 2014 21:41
Search over guys (If you were looking [badass] [badass] ) It's the Blackhorse one.
emo
Views: 4002
Replies: 31
Preview
Fly-Navy's Avatar
Topic started 23 Mar 2014 22:18 by Fly-Navy
Can anyone who has been involved in modelling since the 80s tell me if C A P kits ever did the Bucker please. I was given this model many moons ago to refurb, and it has languished in the loft since then. With the demise of my DL I thought I would get the fuz down and do that, that is almost done...
Fly-Navy's Avatar
Last Post by Fly-Navy 28 Nov 2014 17:57
Nothing wrong with yours BB, looks mighty fine to me and a fine job you have done. Hope mine looks as good as yours when I have had a go at spraying them. John
emo
Views: 650
Replies: 14
Preview
RobC's Avatar
Topic started 19 Sep 2014 13:01 by RobC
So I've gone and bought a new in box Evo 35GT at a fraction of it's original rrp, this being essentially a rebadged MVVS 35. It comes with a 10mm(?) plug with matching spanner, a 4.8v ignition module and no silencer. So - how to keep the noise down without breaking the bank - HK manifolds and cans...
RobC's Avatar
Last Post by RobC 20 Sep 2014 15:32
the Altair fuselage is 78" long, the Tbird instructions reckon it ends up 86", and that extra 8" makes it a close fit. Especially as I always load at least three models for a day out. And yes Owen, that is with the rear seats down :silly:
emo
Views: 642
Replies: 8
Preview
RobC's Avatar
Topic started 08 Jul 2014 14:06 by RobC
Somehow I seem to have found myself with two new fun-flies added to the fleet. First off is a Weston UK Cougar 2000 fitted with a new ASP36A, second is a used Panic (foam wing version) to which I've strapped a new ASP52. Both have been designed with the engine mounted with the cylinder 45 degrees...
RobC's Avatar
Last Post by RobC 24 Jul 2014 09:30
just to put a cap on this one, another couple of tankfulls and they're settling down a treat. Good throttle response and the little 36 in the Cougar wil accelerate it straight up even on a standard silencer. The mixture still needs a final tweak before it will run the tank dry but it's 100% better...
emo
Views: 571
Replies: 4
Preview
RobC's Avatar
Topic started 27 Jun 2014 11:44 by RobC
you know how it is, your idly browsing through ebay and an item catches your eye so you throw a bid in. That's what I did on a Panic, then forgot all about it. It seems I won, now I need to make a trip up to Webbs to pick up an antique Panic. I just hope some of the advertising will peel off ok....
RobC's Avatar
Last Post by RobC 27 Jun 2014 21:43
£50 'best offer'. Most of the ones I've seen have had servos and motor fitted, and seem to go for 120-150, so I thought 50 a more than fair price - now I wonder if £40 would have done it. I picked it up today, what a nightmare on the M6! What should be a 90 minute trip took 3 1/2 hours. Anyway,...
emo
Views: 922
Replies: 11
Preview
a4kskyhawk's Avatar
Topic started 16 Mar 2014 08:41 by a4kskyhawk
well got this also in the box ready to put together. [attachment]
Tony B's Avatar
Last Post by Tony B 11 May 2014 17:56
now that looks special sky. bet it flies really well too.
emo
Views: 1706
Replies: 6
Preview
RobC's Avatar
Topic started 23 Apr 2014 12:43 by RobC
I've found myself the recipient of a flown once Yak 52 from VQ, apparently the PO had issues with it - I didn't see as I was flying myself at the time, but I heard his landing! It's 60" span for a 46 2st or 70 4st, covered in that nasty self adhesive pre-printed vinyl but generally seems ok. It's...
RobC's Avatar
Last Post by RobC 06 May 2014 12:44
Easy come, easy go. With the balance point moved forward the Yak took off and flew an absolute treat, fast and aerobatic. Landing, however, was an entirely different kettle of squid. First approach resulted in a flypast slightly below mach 2, so did attempts 2 and 3, each time progressively...
emo
Precedent T180
Views: 8860
Replies: 88
Preview
The Beard's Avatar
Topic started 07 Jun 2013 20:09 by The Beard
I purchased one of these on E Bay,never flown and very well constructed.Its fitted with a Laser 90 which I couldnt resist buying seperately but still in the model.I heard from Steve Webb Models that they have a glow start extension which I need to fit before I can start the engine.If it arrives in...
The Beard's Avatar
Last Post by The Beard 25 Apr 2014 17:27
love mine with a passion
emo
Harmon Rocket
Views: 20.2k
Replies: 245
Preview
The Beard's Avatar
Topic started 11 Feb 2011 05:38 by The Beard
My beloved Harmon Rocket I lost it when it had just reached a year old[image][image]
The Beard's Avatar
Last Post by The Beard 22 Mar 2014 12:42
Not sure at all.Its only the one servo and it was really in there so dont think it had been changed/The controls were miles out thats whats confusing but theyve adjusted up fine.Going to fit the wing and see how far out theailerons are.The elevator is on 2 servos and they were way out also and the...
emo
Views: 1597
Replies: 22
Preview
a4kskyhawk's Avatar
Topic started 31 Jan 2014 09:02 by a4kskyhawk
well im back, got this the other day its a world models cessna skylink i will be running a asp 52. more to follow when i start putting together. wing span 66in or 1680mm length 51in or 1300mm 7 standard servos [attachment] [attachment]
a4kskyhawk's Avatar
Last Post by a4kskyhawk 16 Mar 2014 09:59
yes its a tony , its made by kyosho
emo
Views: 1517
Replies: 27
Preview
a4kskyhawk's Avatar
Topic started 08 Mar 2014 08:59 by a4kskyhawk
well i have got another build to do and no its not a ARF i have to build it . once i find camera i will do some photos.
a4kskyhawk's Avatar
Last Post by a4kskyhawk 16 Mar 2014 08:36
yes i have not put it on yet
emo
Views: 559
Replies: 7
Preview
The Beard's Avatar
Topic started 19 Jan 2014 19:53 by The Beard
:woohoo: One of my ambitions in flying has been to do my own maiden flight and today at last I achieved it successfully.It all went incredibly well and Im so pleased with myself..Variuos occurrences happened to make this happen .I had no nerves when taking off and i needed to dial out a left pull...
The Beard's Avatar
Last Post by The Beard 20 Jan 2014 00:22
Im so pleased Ive managed to do it at last,but was very happy about doing it and wasnt nervous.Helped that noone was there.
emo
ARTF Acrowot
Views: 2686
Replies: 34
Preview
The Beard's Avatar
Topic started 29 Aug 2013 22:48 by The Beard
A friend at our flying club is giving up.Its his personal life,his wife@s health,distance and time that have helped make the decision.He has an ARTF Acrowot with a new OS 55ax fitted that ive agreed to purchase from him and will take delivery on Saturday,Should fit in well
The Beard's Avatar
Last Post by The Beard 28 Dec 2013 18:19
No sitings
emo
Views: 924
Replies: 12
Preview
The Beard's Avatar
Topic started 19 Oct 2013 22:29 by The Beard
Picked this up today .Dont think its flown ,not quite finished.Cant see all the servos because 2 are buried.Has a 25 2 stroke fitted,some work to do but not much
Dean M's Avatar
Last Post by Dean M 29 Nov 2013 08:20
Missed this thread somehow! Nice buy Beard,
emo
Views: 2038
Replies: 30
Preview
Polyphilla's Avatar
Topic started 18 Oct 2013 19:39 by Polyphilla
I need to take a step back to my old days & put together an I.C. sport model. I've only ever flown models with 2 stroke engines, but I think I'll go for a decent 4 stroke so I need a bit of advice. Many years ago, when I was a lad, O.S. engines were not high performance, they were the poor man's...
The Beard's Avatar
Last Post by The Beard 21 Oct 2013 09:38
That was cheap,I did get 2 cheap ones the guy put collection only and a friend lived quite close and picked them up for me.The one Im bidding on is an OS 46AX,hands off,its double figures
  • Page:
  • 1
  • 2
Time to create page: 3.377 seconds

Your donations are completely optional but very much appreciated

Amount:
 GBP

loadingPROCESSING. PLEASE WAIT...
If you are uploading images, this may take a while.

Please do not refresh the page